Motion Pro CR Pro Throttle
| Part # |
Description |
| 03-0030 |
Motion Pro CR Pro Throttle |
- Die-Cast Aluminum Housing With Black Epoxy Finish
- Straight Pull Assembly
- Recommended For 34mm Or Smaller Straight-Pull
Carburetors
- 4-1/2" Throttle Sleeve With Grip Retaining Ring
- Drum Brake Honda CR Replacement (Pre - 84)
Motion Pro Turbo Throttle
| Part # |
Description |
| 03-0031 |
Motion Pro Turbo Throttle |
| 03-0032 |
Motion Pro Nylon Grip Sleeve |
- Polished Die-Case Aluminum Housing
- Opens 28 - 38mm Carburetors
- Perfect Ratio For Off-Road Motorcycles Or ATVs
- Comes Complete With Adjuster & Dust Boot
- 4-1/2" Handgrip, Same Cable Application As The
"Gasser/Whirlpull" Throttle
- Optional Nylon Sleeve (03-0032) Will Fully Open
Carburetors 40mm & Larger
Motion Pro CR Competition Throttle
| Part # |
Description |
| 03-0033 |
Motion Pro CR Competition Throttle |
- Die-Cast Aluminum Housing With Black Epoxy Finish
- Opens 30 - 38mm Carburetors
- Throttle Cable Will Clear Brake Master Cylinder On
Handlebar
- Uses 4-1/2" Throttle Sleeve With Grip Retaining Ring
- Early Disc-Brake Honda CR REplacement
Magura 314 Throttle
| Part # |
Description |
| 03-0034 |
Magura 314 Throttle |
- Reinforced Polycarbonate Housing
- Adjustable Turn Ratio From MX To Enduro In Minutes
- Includes Protective Rubber Cable Boot
- Opens 28 - 40mm Carburetors
- Ideal For Off-Road Motorcycles Or ATVs
Motion Pro Straight Push/Pull Throttle
| Part # |
Description |
| 03-0035 |
Motion Pro Straight Push/Pull Throttle |
- Die-Case Aluminum Housing With Black Epoxy Finish
- Similar To Throttle Used On Yamaha YZ/WR 400, YZF &
XT Dual Sport Bikes
Motion Pro Push/Pull Throttles
| Part # |
Description |
| 03-0036 |
Motion Pro Push/Pull Throttle, Black |
| 03-0037 |
Motion Pro Push/Pull Throttle, Chrome |
- Die-Cast Aluminum Housing With Either A Black Epoxy
Or Chrome Finish Housing
- Opens Carburetor Up To 38mm
- Perfect For Smooth-Bore Conversions On Street & Race
Bikes
- Fast Action Dual Pull Throttle
- May Also Be Used As A Single-Cable Allowing For Optional Use Of
Dummy Cable For Handy Spare
- Adjustable Wide Open Stop Eliminated Danger Of Pulling Ends Of
Cables
- Can Also Be Used To Set Tach On Racing Equipment
Barnett Nylon Dual Throttle
Barnett Dual Throttle
| Part # |
Description |
| 03-0040 |
Barnett Dual Throttle |
| Part # |
Description |
| 03-0041 |
Barnett Nylon Dual Throttle |
- A Nylon Fast Action, Dual Pull Throttle For 7/8"
Handlebars
- Can Be Used For A Single Cable As Well As Dual
- Single Cable Application Allows For Optional Use Of
Dummy Cable For Handy Spare
- Race-Proven Roll Pin Is Furnished For Positive
Locking Or Throttle On Bar
- Unique Casing Lock - No Split Sockets To Be Lost
- Made Of Lightweight, Fiberglass Impregnated Nylon
- A Nylon Fast Action Single Pull Throttle For 7/8"
Bars
- Comes Complete With Race-Proven Roll Pin For Positive
Locking Of Throttle On Bar
- Unique Positive Casing Lock - No Split Sockets To Be
Lost
- Made Of Lightweight, Fiberglass Impregnated Nylon
Barnett Single Throttle
| Part # |
Description |
| 03-0042 |
Barnett Single Throttle |