Motion Pro Phillips T-Handle
| Part # |
Description |
| 04-0000 |
Motion Pro #1 Phillips T-Handle |
| 04-0001 |
Motion Pro #2 Phillips T-Handle |
| 04-0002 |
Motion Pro #3 Phillips T-Handle |
| 04-0003 |
Motion Pro Phillips Set, 3 Pieces |
- Chrome-Vanadium tool Steel Shafts
- Carbon-Steel T-Handle
- Durable Hard Nickel Pewter Finish
Motion Pro T-Handle Driver
| Part # |
Description |
| 04-0005 |
Motion Pro 1/4" T-Handle Driver (8-1/2" Long) |
| 04-0006 |
Motion Pro 3/8" T-Handle Driver (10-1/2" Long) |
- Use Any 1/4" Or 3/8" Drive Attachments Such As
Sockets, Allen Drive Bits, Crow's Foot Or Swivels
- Chrome-Vanadium Tool Steel Shafts
- Durable Nickel Pewter Finish
| Part # |
Description |
| 04-0010 |
Motion Pro 8mm T-Handle |
| 04-0011 |
Motion Pro 10mm T-Handle |
| 04-0012 |
Motion Pro 12mm T-Handle |
| 04-0013 |
Motion Pro 13mm T-Handle |
| 04-0014 |
Motion Pro 14mm T-Handle |
| 04-0015 |
Motion Pro 17mm T-Handle |
| 04-0016 |
Motion Pro 19mm T-Handle |
| 04-0017 |
Motion Pro Metric T-Handle Set, 7 Pieces |
Motion Pro Metric T-Handles
- Metric T-Handles Feature A Durable Nickel Pewter
Finish (6-Point Deep Sockets)
- Set Includes A Vinyl Storage Pouch
Motion Pro Mini-Pro T-Handles
| Part # |
Description |
| 04-0020 |
Motion Pro 8mm Mini-Pro
T-Handle |
| 04-0021 |
Motion Pro 10mm Mini-Pro
T-Handle |
| 04-0022 |
Motion Pro 12mm Mini-Pro
T-Handle |
| 04-0023 |
Motion Pro 13mm Mini-Pro
T-Handle |
| 04-0024 |
Motion Pro 14mm Mini-Pro
T-Handle |
| 04-0025 |
Motion Pro Mini-Pro T-Handle
Set (8, 10, & 12mm) |
| 04-0026 |
Motion Pro Mini-Pro T-Handle
Set (8, 10, & 13mm) |
| 04-0027 |
Motion Pro Mini-Pro T-Handle
Set (8, 10, 12, 13, & 14mm) |
- Compact Size For Easy Access And Easy Transport
- 6-3/4" Shaft Length
- Chrome-Vanadium Tool Steel Shafts
- Durable Nickel Pewter Finish
- Includes A Vinyl Pouch To Keep Your T-Handles Handy
- Easily Hangs On The Side Of Most Tool Boxes
- Keeps T-Handles Ready For Action
Motion Pro 11-Slot T-Handle Rack
| Part # |
Description |
| 04-0030 |
Motion Pro 11-Slot T-Handle Rack |
Motion Pro Spring Hooks
| Part # |
Description |
| 04-0039 |
Safety Wire Pliers, 6" |
|
04-0040 |
Safety Wire Pliers |
| |
|
| 04-0041 |
Safety Wire: 0.032" Diameter, 1 lb Can |
Safety Wire & Pliers
Motion Pro Cable Luber
| Part # |
Description |
| 04-0065 |
Motion Pro Cable Luber |
- Used To Inject Lubricant Into Cable Housing
- Clamps Over Housing And Wire Allowing An Aerosol Can
To Be Connected
- Once Lube runs Out the Far End, The Cable Is
Lubricated
- Ideal For Use With Motion Pro Cable Lube 02-0011
| Part # |
Description |
| 04-0080 |
Motion Pro Standard Spring Hook |
| 04-0081 |
- Used
| Part # |
Desscription |
| 04-0168 |
Motion Pro Torque Wrench
Adapter |
To Remove Exhaust Pipe Springs, Seat Or Tank Holding Springs, Cotter Pins,
Side Stand Springs & Other Parts
- Made In The USA
Motion Pro Heavy Duty Spring Hook |
Motion Pro Torque Wrench Adapeter
- Chrome-Vanadium Tool Steel With Hard Nickel Pewter
Finish
- Properly Torque Two-Stroke Cylinder Base Nuts & Hard
To Reach Fasteners
- Fits 12mm and 14mm Nuts & Bolts
- Extends the Reach Of Any 3/8"- Drive Torque Wrench By
3"
- Chart Supplied For True Conversion
- Check Owners Manual For Proper Torque Specifications
| Part # |
Description |
| 04-0220 |
Motion Pro 2-Stroke Adapter Kit For Air Cooled
Engines |
- Will Install Cylinder Studs On Most Motorcycles
- Hex Head Is 3/4" or 19mm
- Sold Individually & In A Set With Three Metric Sizes
- Made In The USA
Motion Pro Stud Installation Tool
| Part # |
Description |
| 04-0175 |
Motion Pro Stud Installation Tool, 6mm X 1.0 |
| 04-0176 |
Motion Pro Stud Installation Tool, 8mm X 1.25 |
| 04-0177 |
Motion Pro Stud Installation Tool, 10mm X 1.25 |
| 04-0178 |
Motion Pro Stud Installation Tool, Set of Three |
| 04-0174 |
M
- Kit Includes Extended Thread Adapter And Dial Indicator
Extension
- Allows Water-Cooled 2-Stroke Timing Kit (MP P/N:
08-0250) To Be Used On Air Cooled Engines
otion Pro Stud Installation Tool, 3/18-16" |
Motion Pro 2-Stroke Adapter Kit
Motion Pro Allen Extension
| Part # |
Description |
| 04-0225 |
Motion Pro Allen Extension |
- 5mm Allen On 3/8" Drive Extension For Hard-To-Reach
Case Bolts
- Designed For Use With Air Tools
- Great For Splitting Engine Cases
- 6-1/4" Long
Motion Pro T-6 Combo Levers™
| Part # |
Description |
| 04-0245 |
Motion Pro T6 Combo Lever 12/13mm Hex |
| 04-0246 |
Motion Pro T6 Combo Lever 22mm Hex |
| 04-0247 |
Motion Pro T6 Combo Lever 24mm Hex |
| 04-0248 |
Motion Pro T6 Combo Lever 27mm Hex |
| 04-0249 |
Motion Pro T6 Combo Lever 32mm Hex |
- Tire Spoon / Axle Nut Hex Wrench
- Lightweight Forged 7075 T-6 Aluminum
- Hard Anodized Finish
- Under 10" In Length And Weighs Only 3.5 oz.
- Hex Wrench Sizes Fit Most Popular Motorcycle Axle
Nuts
- Hex Ends Are Rated For A Maximum Torque Of 90 ft-lbs
- Not Recommended For Use With Bib Mousse Tubes Or Tire
Balls
Motion Pro 3/8" Drive Adapters For T-6 Combo Lever
™
| Part # |
Description |
| 04-0250 |
Motion Pro 24mm 3/8" Drive Adapter For T6 Combo Lever |
| 04-0251 |
Motion Pro 27mm 3/8" Drive Adapter For T6 Combo Lever |
04-0252
- Allows Your T-6 Combo Lever™
To Be Used As Your Primary 3/8" Driver
- 3/8" Drive Male And 1/4" Drive Female For Use With
Sockets For Smaller Front Axles
- Lightweight Billet 7075 T-6 Aluminum With Chrome
Vanadium Steel Insert
- Lightning Holes
- Coin Knurled To Facilitate Turning Sockets By Hand
- 3/8" Square Drive Is Rated For A Maximum Torque Of
90 ft-lbs
|
Motion Pro 32mm 3/8" Drive Adapter For T6 Combo Lever |
Motion Pro Oil Filter & Clutch Hub Spanner For Honda
| Part # |
Description |
| 04-0285 |
Motion Pro Oil Filter & Clutch Hub Spanner |
- Made Of Heat-Treated Steel
- Use With A 3/8" - Driver
- Inside Diameter Is 24mm
- Designed To Fit Oil Filter & Clutch Hub On Many Honda
Models (Single- & Twin-Cylinder Machines)
- Fits Most Pre-78 CD, CL, SL & XL Models, XR 200
(80-84), XR 200R (81-94), XR 250L (91-94), XR 250R (86-94) & GL 1000
(75-77)
- Replaces Large End Of 07716-0020100 OEM Tool
| Part # |
Description |
| 04-0290 |
Motion Pro 90° 1/4" Hex
Driver W/Bits |
| |
|
| 04-0291 |
Motion Pro Straight-Slot Bit (Replacement) |
| 04-0292 |
Motion Pro Phillips Bit (Replacement) |
| 04-0293 |
Motion Pro D-Shaped Bit (Replacement) |
| 04-0294 |
Motion Pro 6mm Hex Bit (Replacement) |
| 04-0295 |
Motion Pro 1/4" Hex To 1/4" Drive (Replacement) |
| 04-0296 |
Motion Pro Gear Set (Replacement) |
| 04-0297 |
1-1/2"Straight-Slot Bit (Optional) |
Motion Pro 90° 1/4" Hex Driver
- Precision made of Aircraft Grade Aluminum & Stainless
Steel
- Designed For Any Hard-To-Reach Areas And Air/Fuel
Mixture Screws On Multi-Cylinder Motorcycles
- Gear Driven 1/4" Hex Drive
- Includes five (5) 1/4" Hex Drive Bits (All 1/2" Long)
- Straight-Slot, Phillips, D-Shaped Air/Fuel Mixture Screw Bit, 6mm Hex
Jet Bit & 1/4" Hex To 1/4" Drive Bit
- Can Be Used With Any 1/4" or 6mm Hex Bits
- Strongest Tool Of Its Type On The Market
- Max Torque Is 50 in. lbs
- 17.5" Long
- Replacement Drive Gears
- 1-1/2" Straight-Slot Bit (Optional)
