Motion Pro Degree Wheel
| Part # |
Description |
| 04-0085 |
Motion Pro Degree Wheel |
- Manufactured From 0.052" Thick Aluminum With A 6-3/4"
Outside Diameter And a 6mm Center Hole
- Black Anodize Finish With Easy To Read Numbers
- Check Or Set Ignition And/Or Cam Timing
- May Be Used On 2 & 4-Stroke Engines
Motion Pro Tappet Tool Set
| Part # |
Description |
| 04-0169 |
Motion Pro Tappet Tool Set |
- Heat Treated & Chrome Plated For Durability
- Set Includes Three (3) Wrenches: 8, 9 &10mm & Three
(3) Adjusters: Screw Type, & 3 & 4mm Square-Type
- Interchange Adjusters & Wrenches For Nine (9)
Different Combinations
- Fits Most Motorcycles & ATVs With Screw-Type Tappet
Adjusters
Motion Pro Tappet Feeler Gauges
| Part # |
Description |
| 04-0170 |
Motion Pro Tappet Feeler Gauges: Sizes .002 -
.003" (Card Of 6) |
| 04-0171 |
Motion Pro Tappet Feeler Gauges: Sizes .004 -
.005" (Card Of 6) |
| 04-0172 |
Motion Pro Tappet Feeler Gauges: Sizes: .006 -
.008" (Card Of 6) |
| |
|
| 04-0173 |
Motion Pro Tappet Feeler Gauges: Mixed Set (2 Of
Each Size) |
| |
|
| 04-0305 |
Motion Pro Tappet Feeler Gauge: .002 - .003 (Qty
1) |
| 04-0306 |
Motion Pro Tappet Feeler Gauge: .004 - .005 (Qty
1) |
| 04-0307 |
Motion Pro Tappet Feeler Gauge: .006 - .008 (Qty
1) |
Applications:
Honda
CR 80R/125R/250R/45R/480R/500R, XL 80/100/170. XR 100/100R.
XR/CRF 50 (00-04), FL 250, ATC 70/110 (CDI Only), ATC 185/250R,
TRX 90 (93-00), TRX 70/125/250 & Early 50cc
Kawasaki KD/KX/KDX 80, KM 100, KS 125 & Most
2-Stroke External Flywheel
Models & Earlier Point-Type Ignitions
Suzuki Quad Racers,
125/160EK/250R, DR 100/125/00, DS 80, ALT 185,
50 - 125cc Trail & Street Models & Late Model RMs
Yamaha
Most Single Cylinder Off-Road, Enduro, MX, YZ & Quads With External
Flywheels, 1968 & Later, BW 80, RIVA 50, PW 50, RZ 350, TT 500,
XT 500, YFM 80/100/200/225, YFS 200, YFZ 350, YSR 50, YT 125/175,
YZ 400F
KTM
65SX (99-04), 85SX (04), 105SX (04), 200 EXC/MXC (98-05),
125/250 SX/EXC/MXC (98-05), & 250/300/380 SX/EXC/MXC (97-05)
Motion Pro Flywheel Pullers
| Part # |
Description |
| 04-0185 |
Motion Pro Flywheel Puller: 27mm X 1.0 L.H. |
Applications:
Honda
ATC 90, ATC 110 (With Breaker Points), CB 175, CT 90/350G/360/500/500T.
CM 185/200T/450, CMX 250, Early CR 125/250MX, SL 175/350
Kawasaki KH 400A, KLF 300
(86-87), KLT 110/200, KX 125/250/420/500 (Pre 1981),
KZ 1000/1300 & Z1
Suzuki
GS550/650/750/Early 1100 & Most 4-Stroke Street Models
Yamaha Most
4-Stroke Street Models & 250/350 Electric Start 2-Stroke Twins, FZ 600,
FZR 600/750/1000, TT225, XJ 550/650/700/750/900, FJ 600/750/1000
| Part # |
Description |
| 04-0186 |
Motion Pro Flywheel Puller: 16mm X 1.5 R.H. |
| Part # |
Description |
| 04-0187 |
Motion Pro Flywheel Puller: 18mm X 1.5 R.H. |
Applications:
Kawasaki KLF
110 (96-00), KSF 250 (96-00), KZ 200, KZ 250, EX 250, KL 250,
KZ 400, KZ 44
0, EN 500, EX 500, KZ 550, GPZ 550, ZX 600, KZ 650,
GPZ 750, ZX 750, VN 750, KZ 750, KZ 900, KZ 1000, KZ 1100, GPZ
1100 & KZ 1300
| Part # |
Description |
| 04-0188 |
Motion Pro Flywheel Puller: 24mm X 1.5 R.H.I.T. |
- Replaces Honda OEM Tool 07AMC-MEBA100 &
Suzuki/Kawasaki OEM Tool 57001-1565
- Includes Shaft Protector Cap (OE Reference
07AMC-MEBA110)
Applications:
Honda CRF
450R (02-07), CRF 250R/X (03-07), CRF 150R (07-08)
Kawasaki KX 250F (04-05), KX 450F (06)
Suzuki
RM-Z 250 (04-06), RM-Z 450 (05-06)
Yamaha YZ 450F (06-07)
| Part # |
Description |
| 04-0190 |
Motion Pro Flywheel Puller 20mm X 1.5 Hollow R.H. |
- KTM 4-Stroke Fly Wheel
Applications:
Artic Cat
DVX 400 (04)
Kawasaki
KLX 400, KSF 400
Suzuki
DR-Z 400S, DR-Z 400E, DR-Z 400, LT-Z 400
Puller
- Replaces OEM Tool 580.12.009.000
- Includes Shaft Protector Cap (OE Reference
510.12.016.000)
- Not Applicable To Older Models With Motoplat Ignition
Systems
KTM 250 RFS,
400, 450, 520, 525 RFS
Applications:
Honda CBR
900RR (00-03), VTR-250 (88-90), XL 350 (84-85), XR 350R (84-85)
CM 400 (78-91), CB 400 (78-79), CB 450SC (82-86), CM 450 (82-83),
GL 500 (81-82), CX 500T (82), CX 500 (78-82), CRR 600F (87-90),
CX 650C (83), CX 650TC (83), GL 650 (83), XR 650R (00-05), VT 700C
(84-87), VT 750C (83), PC 800 (89-98), VT 800C (88), ATC 250ES
(85-87), ATC 250SX (85-87), TRX 250 (85-87), TRX 350 (86-87),
TRX 350D (86-87), ATC 350X (85-86)
| Part # |
Description |
| 04-0189 |
Motion Pro Flywheel Puller: 20mm X 1.5 R.H. |
Applications:
Honda
CB 750 (69-78), Most XL 250R, XR 200R, XR 250R/L & VF 500F
Kawasaki KLR 250 (85-95), KLR
650 (87-95)
Suzuki
SV 650 (99-01) & SV 650S (01-02)
| Part # |
Description |
| 04-0191 |
Motion Pro Flywheel Puller: 26mm X 1.0 R.H.I.T. |
| Part # |
Description |
| 04-0192 |
Motion Pro Flywheel Puller 38mm X 1.5 R.H. |
Motion Pro Spark Plug Socket
| Part # |
Description |
| 04-0210 |
Motion Pro Spark Plug Socket, 18mm |
- Originally Designed For Honda XR 400s As A Trail Tool
But Fits Many Models With 18mm Plugs
- The Thin Wall Socket Is Designed To Fit Into The Plug
Cavity And Allow The User To Choose Between The Motion Pro Spark Plug
Ratchet Wrench, A 3/8" Ratchet Or 13/16" Wrench As Well As A Tool Kit
Bar Or Phillips Screw Driver T
- Special Thin Wall Design For Water-Cooled 4-Strokes With
5/8" Plugs
- Unique 2-Step Extension - Swivel Or Fixed
- Socket Can Be Used With A Screwdriver To Hold The Front 19mm
Hex Axles On Late-Model 4-Stroke Motorcycles
hrough A 8.5mm Hole For Removal & Installation
Motion Pro Spark Plug Tool
| Part # |
Description |
| 04-0211 |
Motion Pro Spark Plug Tool |
Applications:
Honda XR 500R
(83-84), XR 600R (92-99), XR 650L (93-04)
TRX 300 (88-91), TRX 400EX (99-04), TRX 400FW (96-99)
TRX 400ES (00)
Suzuki
LT 160E (90-92)
Yamaha YFM 250
(99-00), YFM 350X (86-88 & 90-99), YFM 600,
XT 225 (92-99), TT 600 (85)
KTM
400 SXC (00), 640 LC4 (96-97), 620 SX (97-98), 640 LC4 (99)
Motion Pro 2-Stroke Timing Kit
- Kit Includes Dial Indicator With Extensions And A
14mm Spark Plug Thread Adapter
- Allows Inspection And Adjustment Of Ignition Timing
- Designed To Clear Frame Tubes On Most Recent Water
Cooled Models
- Gauge Face Size 1-1/2"
| Part # |
Description |
| 04-0240 |
Motion Pro 2-Stroke Timing Kit For Water-Cooled
Engines |
- Made From Medium Carbon Steel With Hardened Jaws
- Hold Clutch Hubs, Flywheels, Gears, Sprockets, Etc.
- Features 8mm Spanner Pins
- Jaws Open Up To 5" Wide
| Part # |
Description |
| 04-0255 |
Motion Pro Clutch Holding Tool |
Motion Pro Clutch Holding Tool
Motion Pro Crankcase Splitter
| Part # |
Description |
| 04-0180 |
Motion Pro Crankcase Splitter |
- Will Work On Most 2 & 4-Stroke Engines With
Vertically Split Cases
- Movable Fingers Allow A Multitude Of Bolt Patterns To
be Used
- Included 6mm & 8mm Mounting Bolts
- Unique Design Eliminates Binding Under Heavy Loads
