Motion Pro Hydraulic Brake Bleeder
| Part # |
Description |
| 04-0145 |
Motion Pro Hydraulic Brake Bleeder |
- Makes Bleeding Your Brakes A One-Person Job
- Instructions Included
- Made In The U.S.A.
- Will Not Bleed Air From A Dry System
Motion Pro Pro Bleeder For KTM
| Part # |
Description |
| 04-0150 |
Motion Pro Pro Bleeder For KTM - M4 X 0.7
With External Preload Adjustment |
| 04-0153 |
Replacement Bleeder Valve |
- Kit Includes Bleeder Valves And Adapters For Use On
KTM Fork Caps, Part # 4860.0074S & 4860.0075S As Well As All WP 43 &
48mm Forks Caps With External Spring Preload Adjustment
- Will Reduce Harshness Caused By Air Build-Up
- Allows Bleeding Of Air Pressure Without Tools
- One Of The Easiest Bolt-On Upgrades You Can Make To
Your Forks
Motion Pro Pro Bleeder For KTM
- Kit Includes Bleeder Valves And Adapters For Use On
KTM Fork Caps, Part # 4860.0020S & 4860.0020S1 As Well As All WP 43 &
48mm Fork Caps Without External Spring Preload Adjustment
- Will Reduce Harshness Caused By Air Build-Up
- Allows Bleeding Of Air Pressure Without Tools
- One Of The Easiest Bolt-On Upgrades You Can Make To
Your Forks
| Part # |
Description |
| 04-0151 |
Motion Pro Pro Bleeder For KTM - M4 X 0.7 Without
External Preload Adjustment |
| 04-0153 |
Replacement Bleeder Valve |
| Part # |
Description |
| 04-0152 |
Motion Pro Pro Bleeder - M5 X 0.8 |
| 04-0153 |
Replacement Bleeder Valve |
- Easy To Install - Simply Replace The OE Bleeder Screw
With The Pro Bleeder
- Set Includes Two (2) Pro Bleeder Valves With
Adapters, O-Rings, & Instructions (Installed Height Of 7/8" Or 22mm)
- Fits Most Kayaba And Showa Upside-Down Forks With OE
Bleeder Screws (M5 X 0.8)
- Will Reduce Harshness Caused By Air Build-Up
- Allows Bleeding Of Air Pressure
| Part # |
Description |
| 04-0154 |
Motion Pro Pro Bleeder Fork Kit |
Without Tools
- One Of The Easiest Bolt-On Upgrades You Can Make To
Your Forks
- Will Fit On Most Late Model Japanese Off-Road
Motorcycles
Motion Pro Pro Bleeder - M5 X 0.8
- Kit Offers A Lower Profile To Accommodate Forward
Mount Bar Clamps
- Requires Drilling, Tapping & End Milling Of the Fork
Caps
- Kit Includes Two (2) Pro Bleeder Valves, 5/16-32 Tap,
9/32" Drill Bit, Washers & Instructions (Low-Profile Installed Height Of
3/8" or 9.5mm)
- Required 7/16" End Mill (Not Included)
Motion Pro Pro Bleeder Fork Kit
Motion Pro ForkTru - Alignment Tool
- Quick & Easy To Use Tool For Aligning Front Forks To
Insure They Are Parallel From Top To Bottom
- Knurled Adjustment Screws For Easy Set Up
- Reduces Stiction & Improves Performance Of Your Front
Suspension
- Reduces Seal & Bushing Wear
- Fits Most MX & Off-Road Motorcycles
- Will Work On 27mm - 62mm Fork Legs & Tubes
- Works On Forks That Are 140mm To 220mm On Center
| Part # |
Description |
| 04-0156 |
Motion Pro Fork Oil Level Gauge |
Motion Pro Fork Oil Level Gauge
- For Checking And Adjusting The Oil Level On All
Conventional Or Inverted Forks
- Adjustable Ring Will Measure Oil Levels From 0-300mm
In 0.5 cm Increments
- Syringe Has A Capacity Of 60 mL
- Can Be Used On Bicycles Equipped With Front
Suspension
| Part # |
Description |
| 04-0157 |
Motion Pro ForkTrue Alignment Tool |
Motion Motion Pro Nitrogen Shock Gauge & Filler
- 300 psi Capacity
- Bleeder Valve & T-Handle Plunger Pin Chuck
- Swivel Chuck Has A 12" Flexible Hose
- Instructions, Carrying Box & Schrader Valve Extension
Included (Required On Some Showa Shocks)
- Made In the U.S.A.
| Part # |
Description |
| 04-0160 |
Motion Pro Nitrogen Shock Gauge & Filler |
| 04-0161 |
Schrader Valve Extension |